How to Remove Watermark in CapCut: All Free Methods (2026)

Good news first: if a CapCut watermark has appeared on your video, you probably do not need a dodgy website, a screen recording, or any complicated trick to deal with it. In most cases, what people call the CapCut watermark is not burned into their footage at all. It is a short ending clip that CapCut adds to a project, and you can delete it in a few seconds, for free.

This guide covers every legitimate method for how to remove watermark in CapCut: deleting the ending outro clip, turning off the default ending so it never appears again, exporting template videos the correct way, dealing with a watermark that sits inside the frame itself, and the official CapCut Pro route for premium content. Steps are given for both mobile and PC, because the menus are in slightly different places.

First, Work Out Which Watermark You Have

The right fix depends on which of these you are looking at, so check your exported video before you start:

• A short clip at the very end showing the CapCut name or logo after your video finishes. This is the default ending, also called the outro. It is the most common case, and the easiest to fix.
• A logo inside the video frame itself, in a corner or across part of the picture, while your video plays. This usually comes from a template, a premium element, or footage you imported that already had a mark on it.

If yours is the ending clip, use Methods 1 and 2. If you made the video from a template, use Method 3 as well. If the mark is inside the frame for the whole video, go to Method 4.

Method 1: Delete the Ending Outro Clip

This is the classic way to remove capcut ending footage, and it works on a project before you export it, or on a project you reopen afterwards.

On mobile

1. Open CapCut and open the project from your project list.
2. Scroll or swipe the timeline all the way to the end of your video.
3. You should see a short separate segment after your last real clip. That segment is the ending. Tap it to select it.
4. Tap Delete in the toolbar.
5. Play the end of the video back to confirm your video now finishes on your last clip.
6. Export the video again. The exported file will end cleanly, with no outro after it.

On PC

1. Open the project in CapCut on your computer.
2. Move to the far right end of the timeline. Zoom out if you need to, so you can see the whole project.
3. Click the short ending segment that sits after your final clip to select it.
4. Press the Delete key on your keyboard, or use the delete option in the toolbar.
5. Play the last few seconds back, then export as normal.

One honest warning: you cannot remove the ending from an already exported video file inside CapCut unless that ending is a separate section you can trim off. If you still have the project, always fix the project and re-export. If you only have the exported file, you can import it, trim the last couple of seconds where the ending plays, and export again, as long as the ending does not overlap your real content.

Method 2: Turn Off “Add Default Ending” in Settings

Deleting the ending fixes one project. Turning the setting off fixes every future project, so this is the setting to change if you publish regularly. This is how you remove capcut watermark for free permanently, in the sense that the outro simply stops being added.

On mobile

1. Open CapCut and go to the Me / profile area, or tap the settings gear icon shown on the home screen in your version.
2. Open Settings.
3. Find the option labelled Add default ending.
4. Turn it off. If CapCut asks whether to discard endings, confirm that you want to discard them.
5. Create a quick test project and check the end of the timeline. No ending segment should appear.

On PC

1. Open CapCut and open its Settings from the menu in the top corner of the window.
2. Look in the project / editing settings for the default ending option, where your version places it.
3. Turn the default ending off and save the change.
4. Start a new project and confirm no ending segment is added.

Menu names move slightly between CapCut updates, so if the exact wording differs on your device, look for anything mentioning a default ending, outro, or ending clip in settings. The idea is the same in every version.

Method 3: Export Template Videos Correctly

Templates are where many people accidentally end up with a mark or an ending they did not expect, usually because they screen-record the preview or save the video in the wrong way. A template preview is not your finished video.

1. Open the template in CapCut and tap Use template.
2. Replace the sample clips or photos with your own and preview the full video, including the end.
3. If the template itself adds an ending segment on the timeline after you open it as a project, delete that segment using Method 1.
4. Tap Export inside CapCut and follow the export options the app gives you for that template. Where CapCut offers an option to export without a watermark, or to share onward to TikTok or another platform without one, choose that official option.
5. Save the exported video to your device from that export flow, rather than recording the preview screen.

Some templates use premium elements. If a specific template keeps a mark because of a paid element inside it, the honest options are to choose a free template instead, replace that element with a free one, or use Pro for that project, which brings us to the later methods.

Method 4: Watermarks Inside the Frame

If a mark sits in a corner of the picture for the whole video, for example on footage you filmed yourself through another app, on your own older export, or on an element you placed, these are the clean ways to deal with it. Only do this with your own content or content you have the right to edit. Removing someone else’s mark to pass their work off as your own is not a legitimate use, and this guide does not cover that.

• Crop or zoom slightly. Select the clip, use Crop, or scale the clip up a little and reposition it so a corner mark falls outside the frame. This works best when the mark is near an edge. The trade-off is losing a small strip of picture, so check that you have not cut off heads, captions or products.
• Cover it with your own element. If the spot is consistent, your own logo, a caption bar, or a sticker placed over that corner can be a normal part of your design. This is common for reusing your own older clips in a new series.
• Use a removal or object-removal tool. CapCut and its online editor have offered AI removal tools that can clean an unwanted object or mark from an area of the frame. Select the clip or open the removal tool, brush over the area, apply, and then watch the whole clip back. Moving footage is the test: a result that looks fine on a still frame can smudge when the background moves, so try a short section first.
• Go back to the source. The best fix of all is to re-export the original project or original footage without the mark. Every cover-up method loses some quality or some picture, so if a clean original exists, use it.

Method 5: CapCut Pro, the Official Route

Some effects, elements and templates in CapCut are Pro content. If you build a video around Pro elements and do not have Pro, you may meet limits or marks connected to those elements at export. Subscribing to CapCut Pro through the official app is the legitimate way to unlock that content properly.

Before you pay for that reason alone, try this order first: replace the Pro element with a free alternative, check whether the mark is really just the ending clip from Methods 1 and 2, and export a short test. Many people who think they need Pro actually only needed to delete an outro that took ten seconds to remove. Pay for Pro when you genuinely want its extra tools and library, not because of a misunderstanding about the ending.

How to Export Without a Watermark, Every Time

Once the settings above are in place, capcut export without watermark becomes your normal routine rather than a special trick. Keep this short checklist by your editing process:

• Default ending turned off in settings.
• Timeline checked at the end before every export. The last segment should be your content.
• Templates exported through CapCut’s Export button, never screen-recorded from a preview.
• No premium element in the project that you have not accounted for, or Pro active if there is one.
• First few exports watched right to the final second before you upload them anywhere.

What About Third-Party Watermark Remover Websites?

Search results are full of sites promising to strip watermarks from an uploaded video. Be careful with them. You would be uploading your private, unpublished footage to a service you know nothing about, the output is often compressed and lower quality, and the result can blur or distort the area where the mark was. For a CapCut ending, none of that is necessary in the first place: the built-in methods above are free, faster, and keep your video at full quality.

Frequently Asked Questions

Can I remove the CapCut watermark for free?

Yes, for the common case. The usual CapCut mark is the ending outro clip, and deleting it or turning off Add default ending costs nothing and needs no other app. Normal CapCut project exports do not have a logo burned into the footage.

I already exported my video. Can I still remove the ending?

Yes, if you still have the project, delete the ending there and export again for the cleanest result. If you only have the exported file, import it into a new project, trim the final seconds where the ending plays, and re-export. Check that the trim has not cut any of your real ending.

Why does an ending keep coming back on new projects?

Because the default ending setting is still switched on. Turn off Add default ending in settings using Method 2, then start a fresh project and check the timeline. Projects that already exist may still contain an ending segment you added earlier, so delete those individually.

Does CapCut Pro remove all watermarks?

Pro unlocks premium content and features through the official app, which deals with marks tied to Pro elements and templates. It does not change marks that are part of footage you imported from somewhere else, because those are part of that footage itself.

Will cropping a watermark ruin my video quality?

A small crop or zoom keeps most of the picture and is usually fine for social video. A large crop will soften the image, because you are stretching a smaller area across the full frame. Crop as little as the job needs, and export at the resolution you intend to publish.

Final Thoughts

For almost everyone reading this, the whole job is two small habits: turn off the default ending once, and glance at the end of your timeline before you export. Do those, export templates properly, and you will not have to think about watermarks again. If you have not installed the app yet, or you want the download and our other CapCut guides in one place, start from our CapCut download page on the homepage and work through the checklist above on your first project.